Types of bridges

BRIDGES

A bridge is a structure built to span physical obstacles such as a body of water, valley, or road, for the purpose of providing passage over the obstacle. There are many different designs that all serve unique purposes and apply to different situations. Designs of bridges vary depending on the function of the bridge, the nature of the terrain where the bridge is constructed and anchored, the material used to make it, and the funds available to build it

TYPES OF BRIDGES

Bridges can be categorized in several different ways. Common categories include the type of structural elements used, by what they carry, whether they are fixed or movable, and by the materials used

1. Arch Bridge

Ancient arches were made of stone. Arches work by putting the material into compression. Stone (as well as steel and concrete) work well in compression. A material is in compression when its particles are being pushed together. A column holding up a building is a long thin compression element.

PARTS OF ARCH BRIDGE

The compression forces in an arch have to press ultimately against the ground. To receive those large forces large abutments have to be created

The longest arch bridge in the world (until last year) was the New River Gorge Bridge in West Virginia, built in 1977. It has a central span of 1700 feet and a total length of 4224 feet. The Lupu Bridge in Shanghai now exceeds it by 105 feet. The New River Gorge Bridge is still the highest bridge; it rises 360 feet above the river and weighs 88,000,000 lbs

New River Gorge Bridge

Arches are often heavy. They can carry more load by getting deeper. With its full length in compression, the material can buckle. One way of overcoming buckling is to use more material, and make the arch heavier. At some point too much of its strength is used to support just its own

weight and too little strength is left to carry the superimposed loads of traffic.

2. Suspension Bridge

Ancient suspension bridges were made of rope, vines or chains. Newer suspension bridges use steel plates or super-strong steel cables. Cables work by putting the material into tension. Stone and concrete do not work well in tension; they are too brittle and usually too heavy. A material is in tension when its particles are being pulled apart. A rope holding a weight at its end is a long thin tension element.

Parts of a suspension bridge

A suspension bridge has a curved tension member. Look back at the diagram of “curved tension” back in the forces section. Examples of suspension bridges include rope bridges like those in ancient China, or the Roebling Bridge in Cincinnati Suspension bridges use a combination of tension and compression. The cables can only carry tension loads. By stretching across the towers, they pull down and create compression in the towers.

How a suspension bridge works

The cables that go from the top of the towers down to the ground are the backstays. The backstays are connected to huge rock or concrete piers buried in the ground. The backstays keep the towers from bending in. There are some experiments later in this tutorial that will let you see what happens if the bridge doesn’t have backstays. Look at the second black and white photo of the Roebling Bridge. Can you see that the cables in the center span curve upward to the towers, but the outer cables, called the backstays, are straight? Can you determine the direction of force on the backstays? It is always in the same direction because the force must run in the same direction of the cable. What is the direction of force on the main cables? What makes them curve?

Suspension bridges are very light. This allows them to span very long distances. The longest suspension bridge in the world is the Askashi Kaikyo Bridge in Japan. In addition to the long span, this bridge was designed to resist huge earthquakes (8.5) and hurricane force winds (220 MPH).

3. Beam Bridge

Ancient beam bridges were made primarily of wood. Modern beam-type bridges are made wood, iron, steel or concrete. How a beam operates is more complex than a cable or an arch. In the cable all of the material is in tension, but in a beam part of the material is in tension and part of the material is in compression. Look at the example of the Royal Albert Bridge design by I. K. Brunel in England.

A beam needs to be made of material that can work well under both compression and tension forces. Wood is a good material for this. Stone is not a good material for a beam - it is strong in compression, but weak in tension. That’s why it is good for arches but bad for beams. The same is true of concrete. To make a concrete beam, we need to add steel rods or cables at the bottom (in the tension area.) Long-span beams came into great use after 1850 when the production of large batches of steel became possible. None of the big bridges crossing the Ohio River are beam-types because the span is too long and their weight would be too great. Beams are more often found in shorter spans such as those at many overpasses. Next time you are driving with your parents on the highway, look at the structure beneath the overpasses as you travel beneath them, and you will more often than not see steel wide-flange beams supported by concrete columns.

4. Truss Bridge

Trusses work much like beams: they carry a combination of compression and tension forces. The main difference is that trusses are less bulky (heavy) than beams. Beams use extra material in some areas; these areas don’t use the full strength available to them. Engineers and builders can determine which portions of beams can be removed. The resulting truss concentrates the forces into many smaller members and eliminates the under-stressed areas of beams.

The Taylor-Southgate is a modern example (1995) of a truss bridge over the Ohio River in Cincinnati. It replaced the Central Bridge built in 1890.Compare the differences. The Taylor-Southgate uses fewer, longer spans than the Central Bridge. These longer spans produce much larger forces in the Taylor-Southgate, yet this bridge is not as deep as the Central Bridge. The tubes in the Taylor-Southgate Bridge must carry much higher stress, but they can do so, primarily, because they use a stronger type of steel than the types available in 1890.

Taylor-Southgate Bridge

5. cable-stayed

The newest type of bridge to be developed is the cable-stayed bridge. They have gained great popularity in recent years because of their great beauty and economy. They cannot be used for truly large spans like a suspension bridge, but they are very good for the more moderate spans that trusses have been used for.

The closest cable-stayed bridge near Cincinnati is the William H. Harsha Bridge near Maysville, KY. It has a main span of 320 meters, or about 1,050 feet. It was completed in October 2000.

                                                 William H. Harsha Bridge

Free Download the above article

                    Download  pdf  842 KB         

                            Download  docx  1.51 MB

List of Longest Bridges In The World

List of Longest Bridges In The World

Danyang–Kunshan Grand Bridge is a longest bridge on planet Earth with a length of 164.8 kilometers (102.4 mi)! It is a long viaduct and a network of bridges of many types, made to be a part of 1302 km long Beijing–Shanghai High-Speed Railway. This massive bridge runs through five cities – Danyang, Chanzhou, Wixo, Shunzou and Kunshan.

Second largest bridge on earth is Tianjin Grand Bridge, also part of Beijing–Shanghai High-Speed Railway. This viaduct bridge spans the distance of 113.7 km.

Jiaozhou Bay Bridge is one of the largest bridges in the world. It crosses Jiazhoy Bay with the lengthy of 26.7 kilometers (16.59 mi) and holds the record as the “longest bridge over water”.

Lake Pontchartrain Causeway is the largest over water bridge in the world outside of China. It runs over Lake Pontchartrain in southern Louisiana, United States, and has total length of 38.442 km (23.87 mi). It’s held over water with 9500 concrete pilings and its build in a formation of two parallel bridges with total of 4 lanes.

Luisiana is also home to the second longest bridge of the United States – Manchac Swamp Bridge. Created as twin concrete trestle bridge, it has total length of 36.7 kilometers and represents one third of the total highway length of Louisiana.

Hangzhou Bay Bridge connects Chinese municipalities of Jiaxing and Ningbo in Zhejiang province and features six lanes, longest span between ground supports of 448 meters (cable stayed) and total length of 35.6 kilometers (22 miles).

Runyang Bridge is one of the longest suspension bridges in the world. Its main span has a length of incredible 1,490 meters (4,890 ft, almost 700 feet more than Golden Gate Bridge). Entire viaduct bridge complex of Runyang Bridge is 22.1 miles long.

Donghai Bridge is one of the largest cross-sea bridges in the world. With a a total length of 32.5 kilometers (20.2 mi) it connects mainland china with a offshore island Yangshan which hosts large deep-water port. Majority of the bridge structure is low-level viaducts, with several high cable-stayed sections that allow passage of ships underneath it (largest span is 420m).

Atchafalaya Swamp Expressway is one of the most ambitious bridge complexes in the United States. It features 19 kilometers (12 miles) of trestle bridge, 1.6 kilometers of tunnels, two high clearance bridges, four artificial islands, 3.5 km of causeway, and 8.9 km of access roads (everything with 4 driving lanes) . Its total length is 28.3 km (17.6 miles).

Vasco de Gama Bridge is made from combination of viaducts, rangeviews and cable stayed bridge that run over the Tagus River near Lisbon, capital of Portugal. Total length of the bridge is 17.2 km (10.7 mi) and larges span is 420m (1,378 ft.).

Rio–Niterói Bridge is a box girder bridge located at Guanabara Bay, state of State of Rio de Janeiro, Brazil. It has total length of 13.2 kilometers (8.25 miles), 8 traffic lines, and it still holds the record of longest prestressed concrete bridge in the southern hemisphere.